======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.47.0 // Released for D3220 / D3221 / D3222 / D3230 / D3240 (all versions -A/-B) 10/2019 BIOS R1.47.0 • Microcode updates added (Haswell C0 - Rev 27) Fix for CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 Known problems and restrictions: • USB 3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB 3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • For updating BIOS to actual version, BIOS R1.14.0 (or newer) must be running at system. • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • Some automatic system PowerCycles may occur after BIOS update. • As a result of new Intel(R) ME Firmware (required for new Haswell Refresh CPUs) it’s not possible to flash back prior BIOS R1.17.0. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.46.0 // Released for D3220 / D3221 / D3222 / D3230 / D3240 (all versions -A/-B) 09/2018 BIOS R1.46.0 • New Intel(R) ME Firmware version 9.1.45.3000 implemented. Fix for INTEL-SA-00112 (CVE-2018-3628 / CVE-2018-3629 / CVE-2018-3632) and INTEL-SA-00118 (CVE-2018-3627) • Microcode updates added (Haswell C0 - Rev 25) • GABI (Global Application BIOS Interface) updated. • Support for changing “Intel TXT(LT) Support” (at “Advanced – CPU Configuration” submenu) via GABI implemented. Known problems and restrictions: • USB 3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB 3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • For updating BIOS to actual version, BIOS R1.14.0 (or newer) must be running at system. • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • Some automatic system PowerCycles may occur after BIOS update. • As a result of new Intel(R) ME Firmware (required for new Haswell Refresh CPUs) it’s not possible to flash back prior BIOS R1.17.0. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.44.0 // Released for D3220 / D3221 / D3222 (all versions -A/-B) 02/2018 BIOS R1.44.0 • Updated corporate ME updated to 9.1.42.3002 Hotfix for CSME PRT (INTEL-SA-00086) • Updated Intel Reference Code (INTEL-SA-00087, CVE-2017-5703) • Updated Intel CPU microcode (Haswell C-0 - Rev 22) • Updated HDD Erase Disk feature: Support for SSHD drives. • Fixed: Bios Vulnerability known as ‚ThinkPwn‘ Known problems and restrictions: • USB 3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB 3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • For updating BIOS to actual version, BIOS R1.14.0 (or newer) must be running at system. • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • Some automatic system PowerCycles may occur after BIOS update. • As a result of new Intel(R) ME Firmware (required for new Haswell Refresh CPUs) it’s not possible to flash back prior BIOS R1.17.0. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.42.0 // Released for D3220 / D3221 / D3222 (all versions -A/-B) 10/2016 BIOS R1.42.0 • Microcode updates added (Haswell C0 - Rev 21) • Fixed: Bios Vulnerability known as ‚ThinkPwn‘ Known problems and restrictions: • USB 3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB 3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • For updating BIOS to actual version, BIOS R1.14.0 (or newer) must be running at system. • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • Some automatic system PowerCycles may occur after BIOS update. • As a result of new Intel(R) ME Firmware (required for new Haswell Refresh CPUs) it’s not possible to flash back prior BIOS R1.17.0. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.41.0 // Released for D3220 / D3221 / D3222 (all versions -A/-B) 08/2016 BIOS R1.41.0 • Bug Fix: Flash devices sporadically lost contents. • Bug Fix: Prevent sporadic incorrect behavior during switching Daylight Saving Time. • Bug Fix: SmartCardReader not supported at BIOS. • Bug Fix: System hangs with nVidia Quadro graphics adapter(s) plugged. • Bug Fix: BIOS setup submenu “USB Port Security” (at “Advanced – USB Configuration” submenu) not visible. • Improved: HDD/ODD device detection. • Improved: USB port function while using long cables. • Improved: Japanese language support. • Support for changing “Azalia internal HDMI codec” (at “Advanced – Onboard Device” submenu) via GABI implemented. • Support uEFI boot from USB Hard drive. • Support for Windows 10 updated. • BIOS setup items “Intel AMT: Enabled / Disabled” and “USB Provisioning of AMT: Enabled / Disabled” (at “Advanced – AMT Configuration” submenu) implemented. • EraseDisk functionality updated (to Version 3.8). • GABI (Global Application BIOS Interface) updated. • Microcode updates added (Haswell C0). • New Intel(R) ME Firmware version 9.1.37.1002 implemented. Known problems and restrictions: • USB 3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB 3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • For updating BIOS to actual version, BIOS R1.14.0 (or newer) must be running at system. • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • Some automatic system PowerCycles may occur after BIOS update. • As a result of new Intel(R) ME Firmware (required for new Haswell Refresh CPUs) it’s not possible to flash back prior BIOS R1.17.0. ======================================================================================= MI Aptio V4.6.5.4 BIOS R1.35.0 // Released for D3220-A/B and D3221-A/B 08/2015 BIOS R1.35.0 • Family structure at SMBIOS Type1 (System Information) implemented for update to Windows 10. • Prevent some vulnerability notes. • BIOS Setup item “Refresh Rate Multiplier: 1x / 2x” (at “Advanced – CPU Configuration” submenu) implemented. • Bug Fix: Fujitsu POST logo not centered with some monitor types. Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.34.0 // Released for D3220 / D3221 / D3222 (all versions -A/-B) 01/2015 BIOS R1.34.0 • Capsule Update mechanism improved (Vulnerability Note VU#552286; UEFI EDK2 Capsule Update). • Changed screen resolution and text layout for password prompt if Quiet Boot is disabled. • Solve problem with logo corruption during LAN Boot. • Solve possible issue with integrated graphics --> Updated Video BIOS (BIOS Setup: Graphics Configuration --> IGD Memory = 1024M --> BIOS POST hang!). Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.30.0 // Released for D3220 / D3221 / D3222 (all versions -A/-B) 11/2014 BIOS R1.30.0 • Bug Fix: UEFI EDK2 Capsule Update Vulnerabilities For D322x-B only: • New Video BIOS 1025 PC 14.34 and GOP driver 5.5.1021 implemented. • EraseDisk feature updated. • BIOS Setup entry without password with “Access Level: User” possible with set Administrator password only. • Additional BIOS Setup submenu “Open Source Software License Information” (at “Main” submenu) implemented. Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.25.0 // Released for D3220-A / D3221-A / D3222-A 07/2014 BIOS Rev. 1.25.0 (includes changes of R1.23.0, see below for details) • New Video BIOS 1025 PC 14.34 and GOP driver 5.5.1021 implemented. • BIOS Setup entry without password with "Access Level: User" possible with set Administrator password only. • Additional BIOS Setup submenu "Open Source Software License Information" (at "Main" submenu) implemented. • Workaround for using nVidia GeForce 605 PCIe graphics adapter with BIOS Setup setting “Launch Video OpROM policy: UEFI only” (Menu “Boot – CSM Configuration” submenu) implemented Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.23.0 // Released for D3220/D3221/D3222-B 05/2014 BIOS Rev. 1.23.0 (includes changes of R1.20.0, see below for details) • Bug Fix: Additional graphics adapters may not work after replacing a Haswell CPU by a similar Haswell Refresh CPU. • EraseDisk feature updated to support secure deletion of SSDs (e.g. Samsung PM830 supported now) • Bug Fix: Drives with HDD password set were not useable without keyboard connected. • New UEFI PXE LAN code V6.1.16 for Intel I217LM Gigabit Ethernet implemented. • Mechanism for iAMT health state detection improved. • Correct displayed language of help text for BIOS setup submenu “Serial Port Console Redirection” (at “Advanced” submenu). • Microcode updates added (Haswell C0). Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.21.0 // Released for D3220-A & D3221-A 05/2014 BIOS Rev. 1.21.0 • Bug Fix: POST hang with some PCIe adapters using BIOS setup setting “Secure Boot Control: Enabled” (at “Security – Secure Boot” submenu). • EraseDisk feature updated to support secure deletion of SSDs • Bug Fix: Drives with set HDD password were not useable without connected keyboard. • New UEFI PXE LAN code v6.1.16 for Intel I217V Gigabit Ethernet implemented. • Mechanism for iAMT health state detection improved. • Fujitsu TFTP server address for feature “Auto BIOS Update” changed from IP addressing to domain naming. • BIOS Setup value for item “Aggressive LPM Support” (at “Advanced – SATA Configuration” submenu) changed to “Enabled” and greyed-out. • Unsupported BIOS setup submenu “Serial Port Console Redirection” (at “Advanced” submenu) removed. • Microcode updates added (Haswell C0). • POST and BIOS setup copyright message updated to year 2014. Known problems and restrictions: • Update to BIOS = R1.17.0 is only possible if BIOS = R1.14.0 is installed first • If BIOS = R1.17.0 is installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.20.0 // Released for D3222-A 04/2014 BIOS Rev. 1.20.0 • Bug Fix: POST hangs with some PCIe adapters using BIOS Setup setting “Secure Boot Control: Enabled” (at “Security – Secure Boot” submenu). • EraseDisk feature updated to support secure deletion of SSDs. • Fujitsu TFTP server address for feature “Auto BIOS Update” changed from IP addressing to domain naming. • BIOS Setup value for item “Aggressive LPM Support” (at “Advanced – SATA Configuration” submenu) changed to “Enabled” and greyed-out. • POST and BIOS Setup copyright message updated to year 2014. Known problems and restrictions: • Update to BIOS R1.17.0 or higher is only possible if BIOS R1.14.0 (or higher) is installed first • If BIOS R1.17.0 or higher ist installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.17.0 for D322x-A/B 03/2014 BIOS Rev. 1.17.0 • Provides required updates for "Haswell Refresh" processors incl. updated Intel Management Engine (ME) V9.1.0.1120 • Updated video BIOS and GOP driver (Win 8.x) implemented • Updated PXE LAN code for Intel l217LM implemented • BIOS Setup value for item “Aggressive LPM Support” (at “Advanced – SATA Configuration” submenu) changed to “Disabled” and greyed-out. • Bug Fix: BIOS Setup entry with “Access Level: User” was possible without knowing any password • Note: Intel recommends to use updated drivers when installing "Haswell Refresh" processors Known problems and restrictions: • Update to BIOS R1.17.0 is only possible if BIOS R1.14.0 is installed first • If BIOS R1.17.0 ist installed, BIOS downgrade to any previous BIOS version is NOT possible • Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.14.0 for D322x-A/B 03/2014 BIOS Rev. 1.14.0 • DIPM (Device Initiated Power Management) activated for SATA devices supporting this feature. • Bug Fix: When pressing PowerButton very short while system is in BIOS setup (or non-ACPI OS is booted), it does not switch off. • Bug Fix: Power on via Fujitsu USB keyboard power button not working. • Workaround for sporadic system hangs with plugged USB3.0 devices implemented. • Limit access to BIOS Setup items at “Advanced – Network Stack” submenu when entering BIOS Setup via set “User Password”. • Wake on LAN (WoL) after power failure at ACPI S4 re-enabled. • New UEFI PXE LAN driver for Intel l217LM Gigabit Ethernet GE v5.9.07 implemented. • BIOS boot menu problems with Windows UEFI installations fixed. • Microcode updates added (Haswell C0). • New Intel(R) MEBx version; updated to 9.0.0.0028. • BIOS setup item(s) “PCI Express Slot 1…x: Disabled / Enabled” (at “Advanced – PCI Subsystem Settings” submenu) implemented. • Hang and detection problems with PCIe USB adapters fixed. • System Monitoring: Update of internal System Monitoring data. • Bug Fix: POST message for low BIOS battery not working. • SMBIOS event logging improved. • Feature “Auto BIOS Update” improved. • Some help texts at BIOS Setup “Power” submenu updated. • Some help texts at BIOS Setup “CSM Configuration” submenu (at “Boot” submenu) updated. Known problems and restrictions: • "Haswell Refresh"-processors are not yet supported with this BIOS/Management Engine (ME). BIOS R1.17.0 (or higher) and appropriate ME-firmware required! • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • As a result of failing Intel(R) ME Firmware update with non-English Windows versions it’s not possible to flash back to old BIOS R1.3.0 (or lower). • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • Some automatic system PowerCycles may occur after BIOS update. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.10.0 for D322x-A/B 09/2013 BIOS Rev. 1.10.0 • Windows 8.1 support added. • Updated Trusted Execution Firmware (TXT) to latest Intel Production Release. • Microcode updates added (Haswell C0). • Fixed sporadic bluescreens during processor and system stress tests. • Optimized code flow for hangup issue on resume from Standby if Processor Hyperthreading is disabled in BIOS Setup. • Fixed: Power Failure Recovery setting “Always Off” does not work as expected in combination with Processor Hyperthreading disabled. • System behavior improved when activating system sleep or shutdown via remote management console. • New PXE LAN code for Intel l217LM Gigabit Ethernet GE v1.5.38.01 implemented. • Allow Wake-On-LAN from Windows Standby (ACPI S3) even if Wake-On-LAN is disabled in BIOS Setup. • Bug Fix: Wake on LAN (WoL) from ACPI S3 and S4 is possible although disabled at device manager. • Improved behavior if system is switched off via power button. • BIOS Setup default value for item “xHCI Mode” (at “Advanced – USB Configuration” submenu) changed from “Smart Auto” to “Auto”. • Workaround implemented for USB devices that sporadically wakes system up. • Handle USB tape drives as mass storage devices. • “USB Port Security” mechanism updated. • Solve Win-8 bluescreen after Setup Exit with Discard Changes. • Bug Fix: System hangs after running BIOS boot menu “Diagnostic Program” with problems detected. • POST hang-ups and POST screen destructions during OpROM scan fixed. • Limit access to BIOS Setup item “Remove Invalid Boot Options” (at “Boot” submenu) when entering BIOS Setup via set “User Password”. • Multi monitor support with internal graphics improved. • New System Management firmware (Theseus v1.30) implemented. AC power cycle necessary for activation. • Intel Reference Code updated to Rev. 1.6.2. Known problems and restrictions: • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • As a result of failing Intel(R) ME Firmware update with non-English Windows versions it’s not possible to flash back to old BIOS R1.3.0 (or lower). • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.5.0 for D322x-A/B 07/2013 BIOS Rev. 1.5.0: First released mass production version for D322x-A/B GS2 (= C2-Stepping) • New BIOS feature “Auto BIOS Update” implemented. • BIOS Recovery flash mechanism optimized. Note: Additional files required • Configuration for Intel Display Audio corrected. • New Intel(R) ME Firmware version 9.0.10.1372 implemented. For updating Intel(R) ME Firmware this BIOS must be flashed two times. • Bug Fix: Intel(R) ME Firmware update failed with non-English Windows versions. • Different problems with AMT Console Redirection solved. • Sporadic POST hangs on some Windows 8 systems fixed. • Shifted POST screen messages corrected. • Memory allocation type changed for TPM memory for using Linux. • PS/2 keyboard detection improved. • Bug Fix: System may hang at resume from ACPI S3 with "Hyper-threading: Disabled" (instead of "Enabled" at “Advanced – CPU Configuration” submenu). • New PXE LAN code for Intel l217LM Gigabit Ethernet GE v1.5.35 implemented. • Support for USB High Speed devices optimized. • Bug Fix: CAT Error with "xHCI Mode: Enabled" (instead of "Smart Auto" at “Advanced – USB Configuration” submenu). • Some settings for SATA ports updated. • Bug Fix: Wake on LAN (WoL) after Windows shutdown or DOS off not working. • Audio verb table updated to suppress slight background noise at microphone input. • Serial redirection support updated to improve user experience in different scenarios. • Support for detection of Display Port hot-plug events implemented (Reloading of BIOS default values is required). • Unused USB ports are automatically enabled with USB Port Security enabled. • Bug Fix: Intel vPRO verification test failed (Reloading BIOS default values is required). • BIOS boot menu “Diagnostic Program” updated to V01L10. • System Monitoring data updated. • BIOS Setup help texts updated. • Automatic clearance of BIOS Setup Event Log entries after updating BIOS removed. • “Product Name” and “Customer Serial Number” displayed at BIOS Setup “System Information” (at “Main” submenu). • Intel Memory Reference Code updated to Rev. 1.5.0. Known problems and restrictions: • USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • As a result of failing Intel(R) ME Firmware update with non-English Windows versions it’s not possible to flash back to old BIOS R1.3.0 (or lower). • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" are loaded. ======================================================================================= AMI Aptio V4.6.5.4 BIOS R1.3.0 for D322x-A/B 06/2013 BIOS Rev. 1.3.0: First released version for mass production. Known problems and restrictions: • USB3.0 memory stick sporadically not detected via USB legacy support during BIOS POST when connected to USB3.0 port. • CAT Error with "xHCI Mode: Enabled" (instead of "Smart Auto" at “Advanced – USB Configuration” submenu). • Bootimage download via UEFI PXE slower than via Legacy PXE. • Running VirtualXP crashes during resume from ACPI S3 or ACPI S4. • After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update! • BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled". • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" are loaded. • vPro verification test (Intel) can not pass with BIOS R1.3.0 (Fix expected with upcoming BIOS version) =======================================================================================