======================================================================================= AMI Aptio V4.6.5.4 R1.18.0 for D3313-S 12/2018 BIOS R1.18.0 - Updated SoC microcode to 07000110 (Spectre) Known issues and limitations of BIOS R1.18.0: - PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.17.0 for D3313-S 12/2016 BIOS R1.17.0 - Fixed: Fixed (SMM) Bios vulnerability known as ‚ThinkPwn‘ - Fixed: SetupItemID 0x00D7 could not be changed to 0xAA (PEG) - Fixed: Error log contains non-sufficient entries (e.g. for Virus warning) - Fixed: System hangs, if the BIOS setup item “Advanced / Graphics Configuration / IGD Memory” is set to a value equal or above the actual memory size - Fixed: Unexpected Eventlog in SecureMode without monitor connected to the system Known issues and limitations of BIOS R1.17.0: - PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.16.0 for D3313-S 02/2015 BIOS R1.16.0 (offcial released version) is identical to 1.15.0.SR.2 (Customer Service Release BIOS)! Known issues and limitations of BIOS R1.16.0: - Wake from S3 might take slightly longer than with previous BIOSes - PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.15.0.SR.2 for D3313-S 12/2014 BIOS R1.15.0.SR.2 - Bug fix: in BIOS 1.11.0 and newer the watchdog did not trigger a reset - Workaround: Faulty mSATA cards sporadically were not detected by BIOS. Now, if a read access to an mSATA card results in an error, it is repeated 10 times before giving up. Note: Read errors can still result in problems in the OS, since the BIOS workaround is not active during OS runtime. Known issues and limitations of BIOS R1.15.0.SR.1: - Wake from S3 might take slightly longer than with previous BIOSes - PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.15.0.SR.1 for D3313-S 11/2014 BIOS R1.15.0.SR.1 - Improvement: Moved SLP String from E-Segment to F-Segment because Windows XP System-locked Preinstallation (SLP) was not working in some OEM environments. - Improvement: Simplified ‘recovery mode’: Now BIOS recovery occurs automatically without user intervention. Only the *.ROM file from the admin pack needs to be placed into the root directory of an USB stick. The end of the recovery procedure is indicated by looping beeps short-short-long-long. - Bug fix: Windows XP could hang during restart if PS/2 devices are connected - Bug fix: With BIOS 1.11.0 or later PXE boot with legacy operating systems could fail on LAN1. One symptom could be failing to get an IP address by DHCP under DOS. Known issues and limitations of BIOS R1.15.0.SR.1: - In BIOS 1.11.0 and newer the watchdog does not trigger a reset. This is fixed with BIOS 1.15.0.SR.2 or later. - PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.15.0 for D3313-S 11/2014 BIOS R1.15.0 - New Feature: Added DASH support needs PCIe LAN card D2907 with latest firmware available here: http://support.ts.fujitsu.com/Download/Showdescription.asp?ID=1088973 - Improvement: Centered position of password prompts - Bug fix: Resume from sleep states with USB AddonCard EX-11065 fails - Bug fix: Loading OpROMs lager than 128KiB caused system hang - Security bug fix: UEFI EDK2 Capsule Update Vulnerabilities VU#552286 - Security bug fix: Unauthorized modification of UEFI variables in UEFI systems VU#758382 Known issues and limitations of BIOS R1.15.0: - In BIOS 1.11.0 and newer the watchdog does not trigger a reset. This is fixed with BIOS 1.15.0.SR.2 or later. - In BIOS 1.11.0 and newer PXE boot with legacy operating systems may fail on both LANs. One symptom could be failing to get an IP address by DHCP under DOS. This is fixed with BIOS 1.15.0.SR.1 or later. - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.11.0 for D3313-S 07/2014 BIOS R1.11.0 - Bug fix: Under some circumstances COM1 was not available under Windows 7 - Bug fix: Some mainboards sporadically showed an additional Monitor even there is none connected - Bug fix: Don't halt during POST any more when "Memory Size Changed" was detected - Bug fix: "Online BIOS Update" - option (BIOS Setup) was not working - Improvement: Added warning message when "virus warning" feature detects changes to MBR - Added: Secure Erase for SSHD (Hybrid SSD+HDD) - Added: Support for COM2, COM3 and LPT settings through the tool EditCMOS - Changed BIOS default for 3rd serial port to disabled Known issues and limitations of BIOS R1.11.0: - In BIOS 1.11.0 and newer the watchdog does not trigger a reset. This is fixed with BIOS 1.15.0.SR.2 or later. - In BIOS 1.11.0 and newer PXE boot with legacy operating systems may fail on both LANs. One symptom could be failing to get an IP address by DHCP under DOS. This is fixed with BIOS 1.15.0.SR.1 or later. - DASH support not yet implemented, implemented in 1.15.0 and later - HDMI audio not yet supported (Will be solved with upcoming new AMD driver kit) - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.7.0 for D3313-S 05/2014 BIOS R1.7.0 - Bug fix: LVDS resolution could not be changed by EditCMOS unless LVDS was already enabled - Add SSD support for EraseDisk - Add "Online BIOS Update" - option (BIOS Setup) Known issues and limitations of BIOS R1.7.0: - DASH support not yet implemented, implemented in 1.15.0 and later - HDMI audio not yet supported (Will be solved with upcoming new AMD driver kit) - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.4.0 for D3313-S 04/2014 BIOS R1.4.0 - New Feature: BIOS (Graphics) support for Windows8 / Windows 8.1 in Secure Boot mode added - New Feature: continuous beeps indicate that no memory module is plugged, or a single module is plugged in the wrong slot #2 (lower slot) - New Feature: FLASH Write protection - New Feature: BIOS Boot Watchdog - New Feature: Add beep sound if no graphics output found in SecureBoot mode. - New Feature: New settings auto / enabled / disabled for mSata auto detection - Bug fix: Fixed Windows TPM Bitlocker Hardware Compatibility Check issue - Bug fix: System couldn't wake up by Onboard LAN after Power Failure Recovery - Bug fix: Onboard LAN couldn't be disabled in BIOS Setup - Bug fix: Improve support for plugged PCIe graphics cards - Bug Fix: Fixed potential problems with audio device after standby - Bug fix: CPU was sporadically running at slightly below 100% performance - Bug fix: Setup Option 'Power LED in S3' didn't work - Bug fix: Wake Up Timer did not work sometimes - Bug fix: No 'Safely Remove' icon was shown for one USB port (IO-Shield upper right port) - Bug fix: Fix issues with the setup option 'Skip Password on WOL' Known issues and limitations of BIOS R1.4.0: - DASH support not yet implemented, implemented in 1.15.0 and later - HDMI audio not yet supported (Will be solved with upcoming new AMD driver kit) - If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation) - Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation) - Recording via HDA audio frontpanel is very quiet (solved with upcoming new mainboard revision S13/23/33) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - S.M.A.R.T. cannot be disabled ======================================================================================= AMI Aptio V4.6.5.4 R1.1.0 for D3313-S 01/2014 BIOS R1.1.0 *** First released BIOS version for D3313-S *** Important Notes: - BIOS is NOT released for MS Windows8 / Windows 8.1 If LVDS is enabled, Windows8 / Windows8.1 mode ("Secure Boot") must NOT be enabled, otherwise no display output may be possible after next Boot. In case this happens, mainboard should be reset to Setup default settings. See TechNotes document for further details. - BIOS R1.1.0 can be installed on Evaluation Mainboards D3313-S11/12, D3313-S21/22, and D3313-S31/32. If LVDS is used, make sure to set "LVDS Backlight-Enable Polarity" to - BIOS R1.1.0 should NOT be installed on Early Evaluation Mainboards D3313-S10, D3313-S20, and D3313-S30. They should no longer be used for any functional evaluation Known issues and limitations of BIOS R1.1.0: - BIOS is NOT released for MS Windows8 / Windows 8.1 - DASH support not yet implemented, implemented in 1.15.0 and later - Simultaneous use of onboard graphics and PCIe graphics not yet supported - BIOS Boot Watchdog support not yet implemented - HDMI audio not yet supported - If using 4GB memory modul there is only 2.69 GB RAM usable with Windows7-32Bit - Display stays off after resume from S3 (LVDS and external monitors) using wakeup event timer - Recording via HDA audio frontpanel is very quiet (solved with upcoming new mainboard revision) - Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster) - (Mini-) PCIe WakeUp not yet supported - Onboard LAN can't be disabled in BIOS Setup - Skip Password on WOL does not work - System can't wake up by Onboard LAN Module after Power Failure Recovery - S.M.A.R.T. cannot be disabled