Fujitsu D3313-S1, D3313-S2, D3313-S3, BIOS 1.17.0
Aktueller Ordner: drivers fujitsu Products Mainboards Industrial-und-ExtendedLifetime D3313-S BIOS_D3313-S BIOS_D3313-S1 Previous-Released_Versions |
Dateiname | Größe | Änderungsdatum | |||||
R1.7.0 | |||||||
R1.4.0 | |||||||
R1.16.0 | |||||||
R1.15.0 | |||||||
R1.11.0 | |||||||
R1.1.0 | |||||||
Info_BIOS_D3313-S_R1_17_0.txt | 12.3 KB | 05/12/2016 | |||||
Info_BIOS_D3313-S_R1_16_0.txt | 11.1 KB | 06/02/2015 | |||||
EditCMOS_SetupItemID_D3313-S_R1.16.0.txt | 1.96 KB | 06/02/2015 | |||||
D3313-S1x.R1.17.0.ZIP | 8.82 MB | 05/12/2016 | |||||
D3313-S1x.R1.17.0.SetupItemId.txt | 2.58 KB | 05/12/2016 | |||||
D3313-S1x.R1.17.0.DFI.$xe | 4.72 MB | 05/12/2016 | |||||
D3313-S1x.R1.16.0.ZIP | 4.39 MB | 06/02/2015 | |||||
D3313-S1x.R1.16.0.DFI.$xe | 4.33 MB | 06/02/2015 |
Previous released BIOS version: R1.16.0
Known issues and limitations of BIOS R1.17.0:
BIOS Rev. 1.17.0:
List of changes
- Fixed: Fixed (SMM) Bios vulnerability known as ‚ThinkPwn‘
- Fixed: SetupItemID 0x00D7 could not be changed to 0xAA (PEG)
- Fixed: Error log contains non-sufficient entries (e.g. for Virus warning)
- Fixed: System hangs, if the BIOS setup item “Advanced / Graphics Configuration / IGD Memory” is set to a value equal or above the actual memory size
- Fixed: Unexpected Eventlog in SecureMode without monitor connected to the system
Known issues and limitations of BIOS R1.17.0:
- PXE boot with legacy operating systems may fail on LAN2. One symptom could be failing to get an IP address by DHCP under DOS.
- If using 4GB of memory there is only 2.69 GB RAM usable with Windows7 32Bit (AMD limitation)
- Display stays off after resume from S3 (LVDS and external monitors) when using wakeup event timer (Windows Limitation)
- Bootimage download via UEFI PXE is very slow (Legacy PXE is 6 times faster)
- (Mini-) PCIe WakeUp not yet supported
- S.M.A.R.T. cannot be disabled