D2778-D BIOS Rev. 1.22
List of changes
- Different problems with nVidia PCIe graphics adapters solved
- Bug Fix: BIOS POST delayed with connected optical disk drive at SATA port 0/1 and BIOS Setup settings “SATA Mode Selection: IDE” or “Compatible”.
Known problems and restrictions
- Adaptec ASC-29320A SCSI adapter causes an OPROM error when used together with Fujitsu D2507 SAS adapter
- BIOS setup switch “Power Failure Recovery: Always On” does not work when system is in S5-state (soft-off) and AC-power off time is below 60 seconds.
- The Option ROM space is very limited. Depending from the installed VGA adapter and system configuration, this may cause Option ROM problems.
- Harddisk password and Harddisk acoustic management not supported in SATA AHCI mode (BIOS default).
DOS | USB | WIN | |
BIOS R 1.22 | DOS-Zip-Datei | USB-Stick-Datei | WIN-Datei |