Fujitsu D3313-S4, D3313-S5, D3313-S6, BIOS Update R1.9.0

  • Fixed: BIOS password prompt was not shown after sending a Magic Packet in S5 and pressing power button when [Power]-[Wake-Up Resources]-[LAN] was disabled
  • Fixed: Sporadic hang ups after S3 resume with enabled HDD password
  • Fixed: Behavior of "Power Failure Recovery: Disabled" was not correct
  • Fixed: Windows 10 goes to OS recovery mode with certain Setup configuration
  • Fixed: Alternating Sleep/Hibernate resumes failed
  • Fixed: BIOS Setup Item "HDD Master Password" / "Set Master Password" was always visible
  • Fixed: Stability issues with mSata modules regarding power states (HIPM / DIPM)
  • Fixed: Headless OS boot was not possible with enabled SecureMode
  • Fixed: USB keyboard power button was not working
  • Fixed: Fixed (SMM) Bios vulnerability known as ‚ThinkPwn‘.
  • Fixed: DRAM frequency displayed half of the true speed in the Windows taskmanager
  • Feature (Japanese Language support): Updated strings for "xHCI Mode".
  • Feature: Noise free Computer -- New C6 setup item in [Advanced]-[OnBoardDevices] -- Note: With C6 enable capcitors swing acoustically

Changes between R1.3.0 and R1.5.0:
  • Fixed: "Allow this device to wake the computer" was suppressed for mini PCIe cards
  • Fixed: BIOS boot password requested twice after leaving BIOS Setup
  • Fixed: Intrusion detection warning during POST was not displayed
  • Fixed: "Skip Password on WOL" didn't work
  • Fixed: Fix value in Serial Port 2 configuration was not saved (always set to "Auto")
  • Fixed: LVDS Brightness Control does not dim under Windows 8.1
  • Fixed: Did not stop at message "POST - Invalid date/time" after CMOS clear
  • Fixed: DDR3 RAM 1600MHz was only working at 1333MHz
  • Fixed: After "Load Optimized Defaults" in BIOS setup, "Trusted Computing" sub-menu appeared in "Advanced" setup menu
  • Fixed: If "Advanced/Graphics Configuration/IGD Memory" was set to a value equal or above the actual memory size mainboard hung up
  • Fixed: Improved description text of some BIOS Setup event log entries
  • Fixed: Prevent wakeup by WOL if Realtek LAN device is disabled
  • Fixed: Hard disk password popup box was too small for password string, if Japanese language was selected
  • Feature (Japanese Language support): Updated strings for "HDD Password Description"

Known problems and restrictions:
  • BSOD with WS7P image at reboot.
  • Wake on WLAN not available.
  • Wake On LAN (WoL) works although the LAN controller is disabled in system BIOS.
  • Booting WES7 USB Recovery stick take long time on Steppe Eagle systems.