Fujitsu D2990-A3, BIOS 1.30.0

bios

Download

 
Diese Datei-Ablage ist leer.
 

INFO

BIOS Changes -  Summary:

 
=============================================================
 
AMI Aptio V4.6.5.3 R1.30.0 for D2990-A3
06/2015
 
BIOS Rev. 1.30.0:
 
List of changes:
  • Improved Capsule Update (Vulnerability Note VU#552286).
  • Improved usage of UEFI Variables (Vulnerability Note VU#758382).
  • Support for Windows 8.1 added (Optimized BIOS-reserved Memory allocation).
  • Solved: WOL is possible from S3/S4, although this function is disabled in Device Manager.
  • Solved: External USB drive could sporadically wake the system.
  • Fixed: Standby issue  with Nvidia Quadro NVS 450.
 
Known problems and restrictions:
 
  • As a result of the new Feature “Secure Bios Update” it’s not possible to flash back to previous released Bios with Bios setting “Secure Boot” enabled.    
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
 
=============================================================
 
 
AMI Aptio V4.6.5.3 R1.25.0 for D2990-A3
03/2013
 
BIOS Rev. 1.25.0:
 
List of changes:
  • Sporadic memory problems after resume from ACPI S4 solved.
  • All USB ports (front, rear and internal) are reported as ejectable USB port to Windows.
  • Monitor detection at onboard graphics connectors improved.
  • Bug Fix: Mouse connected to KVM switch sporadically not working after Windows reboot.
Known problems and restrictions:
  •  Rear USB ports show different behaviour regarding support of "Eject Device" in Windows OS     
  • The current Boot Logo tool (V1.02) is no longer supported!
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded. 
=============================================================
 
 
AMI Aptio V4.6.5.3 R1.23.0 for D2990-A3
01/2013
 
BIOS Rev. 1.23.0:
 
List of changes:
  • Updated video BIOS.
  • Added new BIOS feature wake up on RTC on “one day of the week”.
  • Fixed Windows 8 blue screen in UEFI mode after very first ACPI S4 boot.
  • Within Windows XP system may wake up by itself from ACPI S3.
  • Corrected selected devices in audio popup menu. As a result of this an automatic hardware scan without user action may result after first OS boot.
  • Display output is available in case of UEFI network boot.
  • Removed status code from quiet boot screen.
  • Removed legacy first and UEFI first entries for PXE in CSM setup menu.
  • Redesigned Fujitsu boot logo.
 
Known problems and restrictions:
 
  • Rear USB ports show different behaviour regarding support of "Eject Device" in Windows OS     
  • The current Boot Logo tool (V1.02) is no longer supported!
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
=============================================================
 
 
AMI Aptio V4.6.5.3 R1.21.0 for D2990-A3
11/2012
 
BIOS Rev. 1.21.0:
 
List of changes:
  • Issue with previous BIOS versions: USB was powered with 2V in S5 (Hibernate) mode, which could result in system crash during next power-on/wake-up due to malfunction of USB devices. Solved with BIOS R1.21.0
Known problems and restrictions:
  • The current Boot Logo tool (V1.02) is no longer supported!
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
=============================================================
 
 
AMI Aptio V4.6.5.3 R1.20.0 for D2990-A3
11/2012
 
BIOS Rev. 1.20.0:
 
List of changes:
  • Windows 8: ACPI mechanism improved.
Known problems and restrictions:
  • The current Boot Logo tool (V1.02) is no longer supported!
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
=============================================================
 
 
AMI Aptio V4.6.5.3 R1.19.0 for D2990-A3
10/2012
 
BIOS Rev. 1.19.0:
 
List of changes:
  • Added Win 8 support.
  • Added new CPU microcode patches.
  • Added UEFI boot support for Realtek LAN controller.
  • Fixed: Sporadically system power off during boot.
  • Fixed: Sporadically hang up during POST.
  • Changed the behaviour of the power button state feature.
  • Fixed: System not booting with limited "Active Processor Cores" and low power soft off enabled at BIOS Setup.
  • Updated internal BIOS interface ("GABI").
Known problems and restrictions:
  • The current Boot Logo tool (V1.02) is no longer supported!
  • With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults.
  • USB Port Security not working properly
  • It is not possible to downgrade to BIOS Release 1.6.0 or lower.
  • Both PCIe x1 Slots reduce speed from Gen2 to Gen1 after being woken up from ACPI S3 state.
  • When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
=============================================================