Fujitsu D3230-B BIOS R1.23
BIOS Rev. 1.23.0:
List of changes
-
Bug Fix: Additional graphics adapters may not work after replacing a Haswell CPU by a similar Haswell Refresh CPU.
-
EraseDisk feature updated to support secure deletion of SSDs (e.g. Samsung PM830 supported now)
-
Bug Fix: Drives with HDD password set were not useable without keyboard connected.
-
New UEFI PXE LAN code V6.1.16 for Intel I217LM Gigabit Ethernet implemented.
-
Unsupported BIOS setup submenu “Serial Port Console Redirection” (at “Advanced” submenu) removed.Microcode updates added (Haswell C0).
Known problems and restrictions
- Update to BIOS ≥ R1.17.0 is only possible if BIOS ≥ R1.14.0 is installed first
- If BIOS ≥ R1.17.0 is installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible
- Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724!
- USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port.
- Running VirtualXP crashes during resume from ACPI S3 or ACPI S4.
- After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update!
- When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
- BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled".