Fujitsu D3128-B, BIOS R1.15.0

biosBIOS Rev. 1.15.0

List of changes:

  • BIOS Core updated to v4.6.5.3.

  • Usage of UEFI variables improved (Vulnerability Note VU#758382).

  • Improved Capsule Update (Vulnerability Note VU#552286).

  • New SCU OPROM v3.2.0.1022 implemented.

  • Bug Fix: Siemens PS/2 3-key optical mouse not working.

  • Support for Teradici Remote Access Host Controller improved.

  • Microcode updates added (SandyBridge).

  • System Management firmware (BMC) updated. AC power cycle necessary for activation.


Known problems and restrictions:

  • For D3128-B, only DOS-based BIOS update has been released. Windows-based update may cause issues.

  • BIOS Recovery Flash only works reliable, if the same BIOS version in *.ROM file (file on USB stick) and in onboard flash device (= currently installed version) is used

  • After starting BIOS Recovery Flash the update process stays approximately 70 seconds with 0% before continuing. Please note that the system must NOT be switched off during Recovery Flash!

  • BIOS = R1.6.0 must be installed first before Core i7-38xx/39xx processors can be used!