Fujitsu D3240 BIOS R1.20

bios

D3240-B13 GS1

BIOS ≥ R1.20.0

(ready for “Haswell Refresh” processor series)

Hints for production handling of D3240-B:

  • First power-on: Mainboard starts immediately after connecting to power
  • During the first Boot a specific BIOS mode called „Manufacturing Mode“ is enabled:
  • „No Halt an any Error“ à System shall not stop due to date/time error or missing keyboard
  • Recommended handling for system builder:
  • Disable “Manufacturing Mode” via OEMIDENT tool à
  • Optional: Change and enable BIOS Setup Defaults where necessary via EditCMOS tool
  • Optional: Adjust DMI data where necessary via OEMIDENT tool
  • Optional: Set MS Win7 key data where necessary via OEMIDENT tool
  • Force system reboot – now all DOS-based configuration tasks should be done

Note:
From second system boot the mainboard is automatically reset to „normal“ BIOS mode, even if OEMIDENT is not used for disabling the “Manufacturing Mode”.

But: If the “Manufacturing Mode” is not disabled in advance via OEMIDENT, any changes of the BIOS Setup Defaults executed between first and second system boot will be discarded!